Husqvarna K 535i Manual De Usuario página 9

• If you are not careful, the risk of kickback increases.
• Do not hold the product with one hand. This product
is not safely controlled with one hand.
• Do not use a product in a situation where you can
not get for support if an accident occurs.
• Make sure that you can move around safely.
Examine the conditions and the terrain around you
for possible obstacles.
• Overexposure to vibration can lead to circulatory
damage or nerve damage in people who have
impaired circulation. Contact your doctor if you
experience symptoms of overexposure to vibration.
Such symptoms include numbness, loss of feeling,
tingling, pricking, pain, loss of strength, changes in skin colour or condition. These symptoms normally
appear in the fingers, hands or wrists. These
symptoms may be increased in cold temperatures.
• It is not possible to include each possible situation
you can face when you use this product. Always be
careful and use your common sense.
•
Note:
After operating the tool, hearing protection
must be lifted immediately when sawing is
completed to hear sounds and warning signals can
be heard.
Personal protective equipment
WARNING:
and all instructions. Failure to follow the
warnings and instructions may result in
electrical shock, fire and/or serious injury.
• You must use approved personal protective
equipment during operation. Personal protective
equipment does not give you full protection from
injuries but it decreases the degree of injury if an
accident occurs. Speak to your servicing dealer for
recommendations about which equipment to use.
• Your clothing must be close-fitting but not limit your
movements. Regularly do a check of the condition of
the personal protective equipment.
• Use an approved protective helmet.
8
Read all safety warnings
• Use approved respiratiory protection.
• Use approved hearing protection. Long-term
exposure to noise can result in permanent damage
to the hearing.
• Use protective glasses or a face visor to decrease
the risk of injury from particles and dust. This can
result in serious injury, especially to the eyes.
•
Use heavy duty protective gloves.
•
Use boots with steel toe-cap and non-slip sole.
• Always have a first aid kit kit with you.
Safety devices on the product
WARNING:
and all instructions. Failure to follow the
warnings and instructions may result in
electrical shock, fire and/or serious injury.
• Do not use a product with damaged safety
components. The safety equipment must go through
inspection and maintenance regularly. Turn to your
servicing dealer for repair if an inspection of a safety
device is not approved.
Keypad
The warning indicator flashes if there is a risk of
overload. The overload protection temporarily stops the
product and you can not use the product until the
temperature restores. If the indicator shows a solid light,
turn to your servicing dealer.
The automatic stop function
The product has an automatic stop function that stops
the product if you do not use it for one minute.
Power trigger lockout
The power trigger lockout prevents accidental operation
of the power trigger. If you put your hand around the
handle and press the power trigger lockout (A), it
releases the power trigger (B). If you release the handle,
Read all safety warnings
745 - 008 - 12.11.2018