Idiomas disponibles
Idiomas disponibles
It needs to be performed in the following cases:
If the service lamp is on, run car diagnostics first for troubleshooting.
After that, reset the driving mileage or driving time, so as to turn off
the service lamp, and enable a new driving cycle.
If the service lamp is not on, but you have changed the engine oil or
electric appliances that monitor oil life, you need to reset the service
lamp.
5.6 EPB (Electronic Parking Brake Reset)
This function helps you to replace and reset the brake pad.
It needs to be performed in the following cases:
• The brake pad and brake pad wear sensor are replaced.
• The brake pad indicator lamp is on.
• The brake pad sensor circuit is short, which is recovered.
• The servo motor is replaced.
5.7 TPMS (Tire Pressure Reset)
This function can reset the tire pressure and turn off the tire pressure
fault indicator when the car tire pressure fault indicator light is on.
5.8 SAS (Steering Angle Reset)
This function can reset the steering angle to zero to keep the car
running straight.
It needs to be performed generally after replacing the steering angle
position sensor, or after replacing the mechanical parts of the steering
system (such as steering gear, steering column, tie rod ball head,
steering knuckle), or after completing the four-wheel positioning,
body repair, etc.
6. Update
This module allows you to update the diagnostic software & App to the
latest version.
A pop-up message will indicate newer software is available if you don't
update the software in the process of registration.
18
