Idiomas disponibles
Idiomas disponibles
PowerMate
unplugged.
Worn or broken belt.
®
Dirty brushroll or end caps.
PowerMate
will
not run when
attached.
Tripped overload protector in
PowerMate
PROTECTOR (page 17).
Vacuum cleaner in HARD FLOOR
mode.
Full or clogged dust bag.
Dirty filters.
Check bag
indicator
Blocked airflow passage.
activates.
Certain attachment tools.
Vacuum cleaner
Wrong pile height setting.
picks up
moveable rugs
®
or PowerMate
Suction too strong.
pushes too hard.
Dirty power cord.
Cord will not
rewind.
Cord jammed.
Vacuum cleaner
leaves marks on
Wrong vacuuming pattern.
carpet.
TROUBLESHOOTING
®
connections
®
. See OVERLOAD
- 27 -
Plug in firmly.
See BELT CHANGING AND BRUSHROLL
CLEANING (page 23-24).
See BELT CHANGING AND BRUSHROLL
CLEANING (page 23-24).
Remove any items that may be caught or
jammed, then restart. If vacuum cleaner starts
and stops again, clean brushroll and end
caps, then restart.
Press CARPET button to activate PowerMate
Change bag.
Clean/change filters.
Clear blockage from airflow passage.
This is normal. Light should go off when tool is
removed.
Adjust setting.
Select lower Power Level.
Clean the power cord.
Pull out cord and rewind.
See VACUUMING TIPS (page 12).
®
.
