Idiomas disponibles
Idiomas disponibles
3. Lower wand from upright position by
pressing on the HANDLE RELEASE pedal.
Handle
Release
4. Select a pile height setting by pressing
the height adjust pedal on the rear of
®
the PowerMate
shows on the indicator.
Height
Adjust
Pedal
HOW TO START
. The pile height setting
Height Adjust
Indicator
5. Select a position on
the handle three-way
On/Off switch.
Turn vacuum cleaner off.
Turn on the canister
motor only.
Turn on both the canister
and the PowerMate
motors. Brushroll will
come on.
SUGGESTED PILE HEIGHT
SETTINGS
Attention: Refer to your carpet
manufacturers cleaning recommendations.
Some more delicate carpets may
require that they be vacuumed with the
®
PowerMate
brushroll turned off to prevent
carpet damage.
For best deep down cleaning, use the
XLO setting. However, you may need to
raise the height to make some jobs easier,
such as scatter rugs and some deep
pile carpets, and to prevent the vacuum
cleaner from shutting off. Suggested
settings are:
HI – Shag, deep pile, super-soft, or
ultraplush carpets, and scatter rugs.
MED – Medium to deep pile.
LO – Low to medium pile.
XLO – The preferred setting for many
carpets and also for bare floors.
NOTE: To protect bare floors, place the
3- way On/Off switch in the HARDFLOOR
position to turn off brushroll rotation.
- 11 -
®
