Hayward AquaRite Pro Touch Manual Del Usuario página 29

EN
The device is designed to be connected to a protected outlet at all times. The AquaRite
unless the pool equipment is undergoing maintenance or the pool is to be closed (wintering).
Assuming that the chemical balance of the water is within the recommended ranges, the device can be started up.
5a. View and description of the home screen
Red = Communication fault
Production intensity in gr/h
Filtration stopped or insufficient flow
Peristaltic pump operation
Maximum injection time reached
Filtration stopped or insufficient flow
5b. Commissioning of the device
Choose your preferred language
and confirm using the OK
button.
Communication
Time
Electrolysis
Automatic measuring
pH / Salt
Flow
Max. pH set point (Acid)
7.2
on/off
AL3
FL1
Menu access
AquaRite ®
Only use spare parts supplied by Hayward brands ®
5. OPERATION
Confirm the current time and
date.
Pro Touch Page 11 on 16
®
Pro Touch must not be disconnected
Water temperature
Polarity 1 Polarity 2
Pol 1 Pol 2
Production automatically reduced
Cover
to % selected (20% by default)
Wait time
---
Insufficient salt / cell scaled up or to be replaced /
LOW
water temperature too low
Operation of salt chlorination
on/off
Maximum setpoint of Rx
700
Filtration stopped or insufficient flow
FL1
Choose the cell to connect.
Selection table:
T-CELL-3 = AQR-PROT-T3
T-CELL-9 = AQR-PROT-T9
T-CELL-15 = AQR-PROT-T15
T-CELL-15 Low salt = AQR-PROT-T3LS
To access the cell selection menu, go
to System settings > Service menu
(Password = 1 1 2 2 6)