Hayward AquaRite Pro Touch Manual Del Usuario página 26

EN
3e. Installation of the cell and the mechanical flow switch
Flow
switch
Probe holder
Installation and connection of the cell (see diagram):
• Install the cell mount horizontally.
• Install the cell in a bypass.
• Connect the power cable to the underside of the control box.
Installation and connection of the mechanical flow switch:
• Install the flow switch mount (part A) before the cell and on the bypass.
• Unscrew the white protective cover of the mechanical flow switch.
• Screw the ¾" fitting onto the flow switch.
• Put the ¾" O-ring supplied with the kit in place.
• Screw the flow switch onto its mount.
• Connect the red and black cable to the electronic circuit board terminals A
and C
AquaRite ®
Only use spare parts supplied by Hayward brands ®
Tcell S3
Pro Touch Page 8 on 16