Idiomas disponibles
Idiomas disponibles
EN
®
The AquaRite
Pro Touch is a pool treatment system.
It can be used to treat your pool effectively by salt water electrolysis. For the chlorinator to function, it requires a low concentration
of salt (sodium chloride) in the pool water. The AquaRite
into free chlorine which kills the bacteria and algae in the pool. The chlorine reverts back to sodium chloride. This continuous
cycle means that there is no need to treat your pool manually.
®
The AquaRite
Pro Touch is suitable for treating most residential swimming pools.
The quantity of chlorine required to treat a swimming pool correctly varies according to the number of bathers, the rainfall, water
temperature and the cleanliness of the pool...
NOTE: Before installing this product on the filtration system of a pool or spa with an adjacent natural stone terrace or deck,
consult a qualified installer who will advise you on the type, installation, sealant (if any) and maintenance of stone that can be
laid around a saline pool.
NOTE: The use of dry acid such as sodium bisulfate to adjust the pH of the swimming pool is not recommended, especially in
arid regions where pool water is subject to significant evaporation and is not commonly diluted with mains water. Dry acid can
cause a build-up of by-products that can damage your chlorinator.
AQR Pro Touch
Double
probe holder
2. PACK CONTENTS
control box
Flow switch
AquaRite
®
Only use spare parts supplied by Hayward brands ®
1. GENERAL
®
Pro Touch automatically disinfects your pool by converting the salt
Turbo Cell S3
Cell
2 Valves
Peristaltic
pump
Pro Touch
Page 4 on 16
2 x 50mm
saddle clamps
Tube
O
R
P
Rx probe
pH probe
p
H
