Intended Use; Technical Data; Functional Description - Festool MFK 700 EQ Manual De Instrucciones

• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemicallytreated
lumber.
The risk from these exposures
varies, depending on how often
you do this type of work. To re-
duce your exposure to these
chemicals: work in a well ven-
tilated area, and work with ap-
proved safety equipment, such as dust masks that
are specially designed to filter out microscopic par-
ticles. Wash hands after handling.
WARNING
TO REDUCE THE RISK OF INJURY, USER MUST
READ INSTRUCTION MANUAL.
The pictures for the functional description are on a
fold-out page at the beginning of the instruction
manual. When reading of the manual you can fold
out this page for having always an overview of the
machine.
[1-1] Cutter stop
[1-2] Locking for ball bearing brake
[1-3] + Locking for routing depth
[1-7]
[1-4] Plug-it connection
[1-5] Routing depth setting
[1-6] Handle, locking for routing depth
[1-8] Speed control
[1-9] On/Off switch
[1-10] Extractor connector
[1-11] Spindle lock
Accessories shown or described are sometimes not
included in the scope of delivery.
The edge router with router table for edging must
be used for its intended purpose, i.e. cutting edges
made from wood, plastic and similar materials.
Edge router
Power
Speed (no load) n
Tool holder
Max. routing diameter
Weight (excluding cable)
Safety class

Functional description

Intended use

The user is liable for improper or non-in-
tended use.

Technical data

0
MFK 700 EQ
720 W
10000-26000
rpm
8 mm
(optional : 6 mm, 1/4")
26 mm/ 1"
1.9 kg
/II
9