Setting The Mortise Depth; Dust Extraction; Working With The Machine - Festool MFK 700 EQ Manual De Instrucciones

the union nut and clamping collet! They form
one unit.

Insert another clamping collet with union nut
into the spindle.

Gently turn union nut. Do not tighten union nut
if there is no cutter inserted!
5
1
2
3
Please observe all mentioned safety infor-
mations and the following rules when work-
ing:
– Always secure the workpiece in such a manner
that it cannot move while being processed.
– Hold the machine with two hands, one on the mo-
tor housing and one on the gear head or addition-
al handle [1-6] to ensure safe guidance.
– Adapt the feed rate to the cutter diameter and
material. Work with a constant feed rate
12
5-1
5-2
5-3

Working with the machine

Setting the Mortise Depth


Slacken locking mechanisms for routing depth
[1-3] + [1-6].

Adjust desired routing depth at the routing
depth setting [1-7].

Secure locking mechanisms for routing depth
[1-3] + [1-6] .

Dust extraction

WARNING
Dust hazard

Dust can be hazardous to health. Always work
with a dust extractor.

Always read applicable national regulations be-
fore extracting hazardous dust.
At the extractor connector [1-10], a Festool mobile
dust extractor with an extraction hose diameter of
27 mm can be connected.