Idiomas disponibles
Idiomas disponibles
Setting Up Your Humidifier
INGREDIENTS: Eucalyptus Oil, Menthol, Glycol, Cedar Leaf Oil & Others
WARNING: As long as your humidifier is on, the VapoPad heater will also be activated.
This area can be warm to the touch.
NOTE: One complimentary scent pad is included with your unit. Replace with Vicks Vapo Pads, models
VSP-19 / VSP19VPC or Vicks Sleepy Time VapoPad VBR-5 /VBR-5FPC, available at most retailers or
through Consumer Relations or www.VicksHumidifiers.com. Unit may also be used without VapoPads.
Fill Tank
Step 1
1.
Turn tank upside-down. Remove tank cap by turning counter-clockwise
2.
Fill tank with cool tap water. Replace tank cap. Tighten by turning clockwise
on humidifier.
3.
Once the filled water tank has been placed on the unit do not move humidifier. Doing so could
cause leakage and spills.
Operating Your Humidifier
Power
Step 1
Output
Step 1
Step 2
1.
With the power switch in the OFF position, plug the filled humidifier
into a polarized 120V outlet. DO NOT FORCE THE POLARIZED PLUG
INTO THE OUTLET; it will only fit one way.
DO NOT plug in humidifier with wet hands to avoid
electric shock.
1.
Set fan speed to desired output:
High ( ) Max Moisture
Medium ( ) Everyday Moisture
Low ( ) Night time sleep mode
Step 3
.
(Continued)
. Place tank back
5
