Idiomas disponibles
Idiomas disponibles
USER MANUAL
EN
5 - FUNCTIONING OF THE SYSTEM
Main screen
Current time
Electrolysis
Intensity of the production in gr/h
Communication display - mother board
red
indicates communication error
PLUS key
MINUS key
OK key
OK
Modify value/selection
Modify value/selection
Select/confirm
5.1 - ELECTROLYSIS
1.1
1.2
OK
1.1 Electrolysis:
1.2 Level:
Programming of
Desired production of
electrolysis functions.
chlorine (gr/h).
5.2 - SETTINGS
2.1
2.2
OK
OK
2.6
2.7
OK
2.10
2.11
2.11 Password:
Allows to protect the access to the
2.12 Time info:
user´s menu by activating a password. To enter your
times of the different modules and they are displayed
password press a combination of 5 keys and the
on the screen.
system will memorize. If you forget the password,
there is a "master password". Ask you installer/
provider
10
12:30
Pol 2
Polarity 1 /
electrolysis
250
Production automatically reduced to
Cover
the % selected (see display 1.3)
gr/h
Waiting time
---
Pol 2
Cover
Low
Low
Lack of conductivity or salt / scale on
cell / exhausted cell (check working
hours)
Flow
Filtration stopped due to lack
of water flow
UP key
DOWN key
Navigation up
Navigation down
1.3
1.4
1.3 Cover:
Connection of
1.4 Boost:
Continuous
1.5
automatic cover.
filtration during 24h at max
Reduction
of chlorine
intensity. Auto return to
production in percent,
programmed filtration
when the pool cover is
mode.
closed.
2.3
2.3
2.4
2.8
2.9
2.3 Setting
of preferred language.
OK
2.5 Setting
of day and current time.
2.7 Setting
of the intensity of the display lighting
(0-100%) and programming its ON and OFF time.
2.9 Sound:
Programming of the system to emit
sound for the functions: Keyboard (keys); Notices
(pop-up message); Alarms (working alarm);
Filtration (start of the filtration).
2.12
2.13
OK
2x
The system memorizes the operation
2.13 System info:
Information about the available
software version of the TFT display and the power
module. It also shows the ID node which is necessary
for the configuration of the WIFI connection of the
system.
Use only genuine replacement parts Hayward
USER MANUAL
EN
6 - CONNECTION WITHOUT EXTERNAL UNIT
6.1 Connect
each device individually to the power supply.
6.2 Connect
the flow switch to each device.
6.3 Apply
a bridge between SLAVE and GND to each device.
Pol 2
Polarity 2
6.4 Adjust
the production for each device on
the Electrolysis menu.
RETURN/ESCAPE key
1.5
7 - CONNECTION WITH EXTERNAL UNIT
7.1 Connect
each device individually to the power
supply.
7.2 Connect
the flow switch to each device.
7.3 Connect
all the NEOSAL devices to the external unit
as shown on the image.
During the boost period
the redoX control can be
7.4 Adjust
the production for each device on the
deactivated.
Electrolysis menu.
2.5
OK
2.14
11
Revb _ 2022
6.1
6.2
7.1
External unit
Salt chlorinator 1
7.2
Salt chlorinator 2
Use only genuine replacement parts Hayward
6.4
6.3
7.4
7.3
Revb _ 2022
