Use - Silvercrest SSMN 2 D2 Instrucciones De Uso

Use

Ideally, you should lean back and relax during the massage. Provide for a relax-
ing atmosphere. For example, dim the lights a little.
NOTICE
► Ensure that you experience the massage as comfortable and relaxing.
If needs be, vary the pressure and/or your position. Stop the massage
immediately if it is painful or uncomfortable.
► You can also use the hand loops 4 to adjust the pressure, e.g. by pulling
them a little tighter or leaving them looser.
► Never use the appliance for more than 15 minutes. A longer massage
may lead to tension caused by overstimulation of the muscles.
You can select between 2 functions:
–
Shiatsu massage with the massage heads 1 (fast and slow)
–
Warmth (2 of the massage heads 1 illuminate and warm up)
You can combine various massage functions with each other or use them indi-
vidually:
■ Press the "On / Off" button
slow massage.
■ Press the button "Massage"
the button "Massage"
■ Press the "Warmth" button
the "Warmth" button
"Warmth" button
lights on the massage heads 1 and also the LED lights on the "Warmth"
button
NOTICE
If you have switched on the warmth function and the massage heads 1 are
►
rotating and you then stop the massage heads 1 by pressing the "Massage"
button
lights on the "Warmth" button
function again, press the "Warmth" button
function.
NOTICE
►
The appliance switches off automatically after 15 minutes.
■ If you want to terminate the massage before the end of 15 minutes and wish
to switch the appliance off, press the "On/Off" button
■ 8 │ GB │ IE
7. The massage heads 1 begin with the
6 to increase the massage speed. Press
6 once again to stop the massage heads 1.
5 to switch the warmth on. The LED lights on
5 and the massage heads 1 light up. Press the
5 once again to switch the warmth function off. The
5 go out.
6, the warmth function also turns off at the same time. The LED
5 flash. If you want to use the warmth
5 to reactivate the warmth
7.
SSMN 2 D2