Idiomas disponibles
Idiomas disponibles
EN
This section describes how to install the refrigerator unit and to reinstall the console back
panel and cupholders.
8.1
Installing the front fan
3
2
11 - Installing the front fan
1. Fan
2.Wiring
1.
Insert the fan into the opening with the wiring leading upwards.
2. Tape the wiring to the top of the console so it will be out of the way when installing
the refrigerator.
8
1
3.Tape
8.2
Removing the console lid bottom cover
1
3
2
12 - Removing the console lid bottom cover
1. Locking tabs
2.Screw
1.
Use a T20 Torx screwdriver to remove the single screw at the bottom of the console
lid bottom cover.
2. Use a panel removal tool to pry up the bottom of the cover until the clips disen-
gage.
3. Depress the console lid button to disengage the locking tabs from the console lid
bottom cover.
4. Continue prying the console lid bottom cover up until it is completely detached.
5. Set the console lid bottom cover aside.
8.3
Installing the refrigerator
2
13 - Installing the rubber protective pieces
1. Rubber protective piece
1.
Snap the two rubber protective pieces on the back rail of the console bin.
2. Replace the rubber mat in the bottom of the console bin.
3. Plug the 12 V power plug into the 12 V power connector.
Center Console Refrigerator
3.Panel removal tool
1
2.Back rail
