Idiomas disponibles
Idiomas disponibles
EN
This section describes the assessment and location preparations to install the refrigera-
tor.
7.1
Assessing the installation location
1.
Confirm your vehicle is the correct model, model year, and trim level to accept
the refrigerator. See
Specifications
packages with an integrated center floor console are eligible.
2. Verify you have the correct parts and tools to perform the refrigerator installation.
See
Tools and materials
on page 4 for more information.
7.2
Removing the console back panel
2
5 - Removing the cupholder screw
1. Cupholder
1.
Remove the rubber mat from the bottom of the cupholder.
2. Use a 7 mm socket wrench to remove the screw.
6
on page 5 for more information. Only trim
1
2.Screw
1
6 - Removing the console back panel
1. Console back panel
3. Use a panel removal tool or a thin flat object to pry off the console back panel, tak-
ing care not to strain the internal electrical connections.
7 - Removing the electrical connection
1. Electrical connections
2.Gray power connector
4. Unplug the gray power connector from 12 V socket.
Center Console Refrigerator
2.Panel removal tool
1
2
3
3.12 V socket
2
