Idiomas disponibles
Idiomas disponibles
EN
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product specifications.
4 General information
This section provides information on the included parts, installation tools and materials,
component locations, of the refrigerator.
Note The images used in this document are for reference purposes only.
Components and component locations may vary according to specific prod-
uct models. Measurements may vary ± 0.4 in (10.0 mm).
4.1
Tools and materials
Dometic recommends that the following tools and materials be used while installing the
appliance.
Included parts
Refrigerator
Rubber mat
Front fan
Front fan template
Front fan hole cap
Power connector template
Rubber protective piece
Top cover trim
Recommended tools
Drill
2.5 in (63.5 mm) hole saw drill bit
1-1/8 in (29 mm) hole saw drill bit
7 mm socket wrench
Marker
Multimeter
4.2
Data plate
This section provides the location of the refrigerator data plate. Have this information
readily available if you have to call the Dometic customer support center.
4
Quantity
1
1
1
1
1
1
2
1
Panel removal tool
#2 Phillips screwdriver
Removable tape
T20 Torx screwdriver
Vacuum or shop vac
Model
CCF-T/Ford P702
PNC
XXXXXXXXX
SKU
9620001662
Serial
XXXXXXX
Range:
CoolFreeze
Max. Pressure:
ND 11 bar/HD 25 bar
Total Gross Volume:
~6.5L
Input Voltage:
DC 13.5 V
Climatic class:
N or T
Rated Current:
5.6 A
Refrigerant:
R 134a / 0.026kg
Insulation Blowing Gas:
GWP=1430 / tCO
-eq=0.037
2
1 - Data plate location
4.3
Component locations
This section identifies the refrigerator's main components.
1
3
6
5
Center Console Refrigerator
C
H
5
10
Made in China
www.dometic.com
2
4
