Idiomas disponibles
Idiomas disponibles
- "Review" - the device is able to store up to 10
measurements. In case there are more measurements, the
oldest measurements will be overwritten with the newer
ones. Stored measurements can be deleted with the button
assigned to "Delete" function.
- "Setting Limit" - "High Limit" or "Low Limit" - Setting the
maximum/minimum limit value or disabling it. If it is
deactivated, the items associated with the limit will be
displayed as "***" in the statistics. The third option is to
activate or deactivate and set the "NDFT" value (nominal dry
film thickness).
- "Group Type" - the instrument provides the user with a
variety of data to choose from. There are pictograms on the
measurement page:
Normal mode
Averaging mode
"Performance Standard for Protective
Coating" - standard for protective coatings. If
"IMO PSPC" is selected, the instrument will
automatically switch to the function of
setting the nominal dry film thickness
(NDFT).
When using the averaging mode, the
measurement results can only be stored by
calculating the average value if the
measurement points are equal to the set
number of measurements. The numeral in
"1" indicates the number of measurements
of the current mode buffer average, while
"5" indicates the set number of average
measurements.
- "Clear Current Group" - deletes all measurement data in the
current group.
- "Clear Current Batch (Car)" - clearing all measurement data
of the current batch (vehicle).
On the measurement interface, briefly pressing the button
assigned to "Batch (Car)" (Batch [Vehicle]) moves to the next
batch or vehicle. Pressing and holding down the button
