Parkside PBH 800 A1 Traduccion Del Manual De Instrucciones Originales página 5

HAMMER DRILL PBH 800 A1
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
The PBH 800 A1 hammer drill (hereinafter
referred to as appliance) is suitable for:
▯ Hammer-drilling into brickwork, concrete and
stone
▯ Chiselling into concrete, stone and plaster
▯ Drilling into stone, wood and metal
Any other usage or modification of the appliance is
deemed to be improper and carries a significant
risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse. The appliance
is not intended for commercial use.
■ 2 │ GB │ IE
Depicted components
Screw for the depth stop
Rotation direction switch
ON/OFF switch
Locking button for ON/OFF switch
Release button for function selector switch
Function selector switch
Additional handle
Dust protection cap
Tool holder
Locking collar
Depth stop (not prefitted)
Quick-release chuck
Package contents
1 hammer drill PBH 800 A1
1 additional handle
1 quick-release chuck with SDS plus system tool
fitting (see fig. A)
3 SDS drill bits (6/8/10 x 150 mm, see fig. B)
1 flat chisel (14 x 250 mm, see fig. B)
1 depth stop
1 carrying case
1 set of operating instructions
Technical data
Rated power consumption
Rated voltage
Rated idling speed
Stroke rate
Impact energy
Max. drill diameter
Protection class
800 W
230 V ∼, 50 Hz (AC)
n 0–1650 rpm
0
0–7500 rpm
1.2 J
13 mm for steel
24 mm for wood
19 mm for concrete
II / (double
insulation)
PBH 800 A1