Idiomas disponibles
Idiomas disponibles
Maintaining the Filter
Cleaning the Filters
1
Separate the cover of the product.
2
Remove particles off of the ultra-fine filter with
a vacuum cleaner or a soft brush.
• If contamination cannot be eliminated after
cleaning, replace the ultra-fine filter.
3
Separate the ultra-fine filter from the total filter.
• How to separate the ultra-fine filter: Check
the Velcro of the ultra-fine filter and carefully
remove the ultra-fine filter in order to avoid it
being damaged.
4
When you assemble the ultra-fine filter, follow
the reverse order of the separation procedure.
CAUTION
• Do not clean the filter with water. The service
life of the filter may be reduced.
• Be careful not to damage the ultra-fine filter
when using a vacuum cleaner.
• Take caution because there is a risk of tearing
or loss when separating or assembling the
ultra-fine filter.
NOTE
• In case of the dual model, clean the bottom
filter in the same way.
Replacing the filter
1
Separate the cover from the product and
replace the filter.
• To avoid polluting the surroundings when
replacing the filter, place a newspaper on
the floor before you remove the filter.
2
Once you have replaced the filter, disable the
filter replacement alert.
EN
27
