Operation Starting; Using The Mode; Single Mode - LG AS651D Serie Manual Del Usuario

Operation starting

Press the Start/Stop button to start the operation.
NOTE
• When the operation is started for the first time,
the appliance operates in Booster mode.
• The most recently used mode is memorized
if the power supply is cut off as a result of a
power failure.
• When the operation begins, the display
of sensor ready ( ) will appear for
approximately 30 seconds.

Using the Mode

• Each time you press the Mode button, the
mode changes in the following order:
− Single Model: Smart→Booster→Normal
− Dual Model: Smart→Booster→Dual→Single
Smart Mode
Operating mode and fan speed are adjusted
automatically according to overall air quality.
NOTE
• When the appliance is operated in Smart
mode, Speed, Booster Speed, and Swing
buttons are not operated.
Booster Mode
Clean Booster circulates the indoor air by quickly
sending purified air over an extended distance.
CAUTION
• Be careful not to allow your hands to be
pinched by the moving parts of the clean
booster.
NOTE
• When the power cord is unplugged before the
clean booster is completely closed, plug the
cord in again. The clean booster will rotate and
properly close.
Rotating the Clean Booster
Press the Swing button during the Booster mode
operation.
Dual mode: Only for the relevant
product
The product operates air purifiers at the top and
bottom simultaneously to purify indoor air quickly.

Single Mode

Single As a basic operation mode for
Model
air purification, air speed can be
adjusted.
Dual The air purifier at the bottom purifies
Model
indoor air.
• The air purifier at the top operates
at a low speed.
EN
17