Installation Location Requirements; Transportation Requirements - LG AS651D Serie Manual Del Usuario

4
Install the filter in the appliance.
• Install it with the side where the handle is
attached facing up.
Handle
5
Insert the fixing part at the bottom of the cover
into the fixing grooves at the bottom of the
product and close the cover.
CAUTION
• In case of the dual model, remove the support
and the vinyl of the filter at the bottom of the air
purifier in the same way.
• Be sure to remove the filter packing support
and the vinyl before using the product. Failure
to do so may cause product malfunction.
• Pay attention to filter direction when installing
it. Failure to do so may cause product
malfunction and failure.
Installation Location
Requirements
Install the appliance 1m away from a wall.
• The air inlet needs sufficient space to function
properly.
The performance of the appliance may
vary depending on the service environment
(temperature, humidity, etc.).
• The appliance can provide the guaranteed
performance in an environment with humidity
ranging between 40% and 70%.

Transportation Requirements

When you relocate or store the appliance, wind
the power cord onto the bottom of the product to
prevent it from dragging on the floor.
• Failure to do so may damage the power plug or
leave a scratch on the floor.
When carrying the product
• Do not carry the product by holding the
external cover. Doing so may allow the cover
to open and the product to drop. Dropping the
appliance may cause personal injury or product
malfunction.
Single
Transport the product safely by
Model
holding the bottom of the product with
both hands.
Dual Transport the product safely by having
Model
two people hold the central part of the
product.
EN
1 m
13