Idiomas disponibles
Idiomas disponibles
Mini Heki Style
7
Installing Mini Heki Style
Supplementary to fig. 4
The scope of delivery contains a mounting frame, which is suitable for roof
thicknesses of 25 – 42 mm or 43 – 60 mm.
1. Measure your roof thickness W.
2. Shorten the sleeves to size H (see table).
3. Use the screws with appropriate lengths (see table).
See fig. 5
➤ Check that the roof light has sufficient space around (approx. 1 to 2 mm) it in the
roof opening.
See fig. 6
➤ Clean the roof opening in the mounting area.
See fig. 7
A
NOTICE!
Observe the instructions of the sealant manufacturer.
➤ Seal the mounting frame with a flexible non-hardening sealing compound (e.g.
SikaLastomer-710).
See fig. 8
1. Observe the direction of travel when installing.
2. Place the outer frame in the middle of the roof opening.
3. Press the outer frame in the roof slightly so that the packing compound spreads
out.
See fig. 9
1. Install the mounting frame.
2. Tighten the screws 10 minutes after installation.
See fig. 0
➤ Install the fastening clips on the inner frame at the specified distances.
See fig. a
➤ Fit the inner frame into the mounting frame.
EN
Installing Mini Heki Style
7
