Idiomas disponibles
Idiomas disponibles
Connecting to a TV that supports Dolby Atmos
Pre-connection Checklist
• Dolby Atmos® is supported in "TV ARC" or "Wi-Fi" mode.
• Make sure that the content supports Dolby Atmos®.
1. With the Soundbar and TV turned off, connect the HDMI cable as shown in the figure.
2. Turn on the Soundbar and TV.
3. TV sound is output from the Soundbar.
1. Connect the Soundbar and TV to the same wireless network (Wi-Fi).
2. For sound output of the TV, select Soundbar.
3. TV sound is output from the Soundbar.
NOTE
• When you use Dolby Atmos®: If the input source is Dolby Atmos®, refer to "Output specifications for the different sound effect modes" on
page 12.
• Configuring Dolby Atmos® on your BD player or other device connected to the TV.
Open the audio output options on the settings menu of your BD player or other device and make sure that "No Encoding" is selected for
Bitstream. For example, on a Samsung BD Player, go to Home Menu → Sound → Digital Output and then select Bitstream (unprocessed).
• This function is available in some Samsung TVs and some Soundbar models.
Connect to the HDMI IN
(ARC) port of your TV.
HDMI IN
(ARC)
LED indicator
TV menu
HDMI to Micro
HDMI Cable
Top of the Soundbar
White On → Off
"TV ARC"
Wi-Fi
LED
indicator
ENG - 20
SERVICE
HDMI
(ARC)
Rear of the Soundbar
White On → Off
"Wi-Fi"
