Idiomas disponibles
Idiomas disponibles
12
TONE CONTROL
13
Sound Control
14
USB port (C-type)
for charging
Active Voice Amplifier (AVA)
• Analyzes external noise in real time while soundbar is playing, so that voice audio can always be heard clearly.
• No data is saved during the analysis.
Using the Hidden Buttons (Buttons with more than one function)
Remote Control Button
WOOFER (Up)
Up
(Sound Control)
(Source)
By pressing the button, you can adjust the volume of the treble or bass sound. The defired item can be adjusted
using the Up/Down buttons. This function is enabled in Sound mode excluding in Standard mode.
• To control the volume of the treble or bass sound, select "Treble" or "Bass" in Sound Settings, and then adjust
the volume between -6~+6 by using the Up/Down buttons.
• Once the bass level is changed, the woofer level will be also adjusted accordingly.
LED indicator
By pressing the button, you can set the audio function. The desired item can be adjusted using the Up/Down
buttons. Each time the mode changes, the Multicolor LED blinks in white.
LED indicator
• Voice enhancement makes it easier to hear spoken dialog in movies and TV.
• Night Mode is optimized for night time viewing with the settings adjusted to bring the volume down but keep
the dialog clear.
• Press and hold the
(Sound Control) button for about 5 seconds to adjust the sound for each frequency band.
150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the Left/Right buttons and each
can be adjusted to a setting between -6 to +6 using the Up/Down buttons.
(Make sure the Sound mode is set to "STANDARD".)
• If the video on the TV and audio from the Soundbar are not synchronized, select "Sync" in Sound Control, and
then set the audio delay between 0~300 milliseconds by using the Up/Down buttons.
• "Sync" is only supported for some functions.
• The Virtual function can be turned On/Off by using the Up/Down buttons.
The LED lights while charging. When fully charged, the LED turns off.
• The USB Cable is not provided.
• When the remote control does not work due to low battery, charge it by using the USB-C type port.
Hidden Button
TV remote control On/Off (Standby)
Audio Feedback On/Off (Standby)
White Blinks X1
"Treble" → "Bass"
White Blinks X1
"SpaceFit Sound" → "Active Voice Amplifier" → "Voice
enhancement" → "Night Mode" → "Sync" → "Virtual"
Function
ID SET
7 Band EQ
ENG - 11
Reference page
page 13
page 9
page 11
page 9
