Blasting Caps and Blasting Areas
Warning: To avoid possible interference with
blasting operations, turn off your radio when
!
!
you are near electrical blasting caps, in a
blasting area, or in areas posted: "Turn off
two-way radio." Obey all signs and
W A R N I N G
instructions.
Batteries
Use only Motorola Solutions approved
batteries. Risk of explosion if the battery is
replaced by an incorrect type.
• Charge your battery using the approved Motorola
Solutions charger.
• Use the battery in accordance with its water and/or dust
Ingress Protection (IP) rating.
• DO NOT discard your battery into a fire.
• DO NOT replace the battery in any area labeled
"Hazardous Atmosphere".
• DO NOT disassemble, crush, puncture, shred, or
otherwise attempt to change the form of your battery.
• DO NOT dry a wet or damp battery with an appliance or
heat source, such as a hair dryer or microwave oven.
• DO NOT allow conductive material such as jewelry, keys,
or beaded chains to touch exposed battery terminals.
• Do not dispose of batteries with household waste.
4
Safety Instruction for Power Supply
1. The power supply is for use with equipment according to
IEC/EN/UL 62368-1/60950-1.
2. The power supply is for indoor use in dry locations.
3. The equipment should be connected to a nearby and
easily accessible socket outlet.
4. If the power supply is damaged or defective, do not repair
or use the power supply.
Do Not Substitute Options or Accessories
The Motorola Solutions communications equipment
certified as intrinsically safe by the approving
agency (FM, UL, CSA, CENELEC) is tested as a
complete system which consists of the listed agency
approved portable, approved battery, and approved
accessories or options, or both. This approved
portable and battery combination must be strictly
observed.
There must be no substitution of items, even if the
substitute has been previously approved with a
different Motorola Solutions communications
equipment unit. Approved configurations are listed by
the approving agency (FM, UL, CSA, CENELEC).
The Intrinsically Safe Approval Label affixed to radio
refers to the intrinsically safe classification of that
radio product, and the approved batteries that can
be used with that system.
The manual PN referenced on the Intrinsically Safe
Approval Label identifies the approved accessories
and or options that can be used with that portable
radio unit.