Idiomas disponibles
Idiomas disponibles
Dual Watch Mode
Enables you to scan the current channel and
another channel alternately.
Setting Another Channel and Starting
Dual Watch
1. Press
Menu/Lock button until
flashes.
2. Press
or
to select the channel, then press
3. Press
or
to select the code.
4. Press the PTT button or wait until the time out to activate
Dual Watch. The screen alternates between Home
Channel and Dual Watch Channel.
5. To end Dual Watch mode, press
If you set the same channel and code as
Note:
current channel, Dual Watch does not work.
TM
VibraCall
Alert
TM
VibraCall
is a vibrating alert that notifies you that
your radio is receiving a message. This is useful in
noisy environments. The Vibrate Alert is triggered
when you received a call. It is triggered again if
there is no activity within 30 seconds after the
previous call.
1. To turn vibrating alerts on, press
2. Press
3. Press the PTT button to confirm and exit Menu or
appears. The
Keypad Tones
You may enable or disable the keypad tones. You
hear the key tone each time a button is pushed.
.
1. Press
2. Press either
3. Press the PTT button to confirm and exit menu or
Menu/Lock button.
Note:
Transmitting a Talk Confirmation Tone
You can set your radio to transmit a unique tone
when you finish transmitting. It is like saying "Roger"
or "Over" to let others know you are finished talking.
until
is displayed. The current setting flashes.
or
to change the setting to On/Off.
Menu/Lock button to continue set up.
Menu/Lock button until
current setting On/Off flashes.
or
to turn On or Off.
Menu/Lock button to continue set up.
When the keypad tone feature is off, the
following are not disabled:
• Transmit timeout alert tone
• Call tone
• Low battery alert tone
• Talk confirmation tone
Menu/Lock button
appears. The
19
