Idiomas disponibles
Idiomas disponibles
Emptying the Permanent Filter and Collection Container
1. Switch off the appliance with the on / off switch. Pull the
mains plug out of the socket.
2. Detach the motor housing from the collection container
by pressing the locks inwards. Remove the motor
housing.
3. If necessary, remove the permanent filter. Shake it out.
4. Remove the suction hose.
5. Empty the collection container.
6. If necessary, put the permanent filter back into the
collection container.
7. Reassemble the hose connection and the motor housing.
8. Resume operation.
End Operation
1. Switch off the appliance.
2. Unplug the mains plug from the socket.
Cleaning
WARNING:
• Pull the mains plug out of the socket before cleaning
or maintaining the appliance.
• Never immerse the motor housing in water for clean-
ing. It could cause an electric shock or fire.
CAUTION:
• Do not use a wire brush or other abrasive objects.
• Do not use harsh or abrasive cleaners.
Problem
The appliance has no function.
The appliance does not suck.
12
BS1313_IM_new - SH separat
Collection Container
• Rinse the collection container with clean water after use.
• You can remove impurities in the container with a sponge
Accessories
• You can clean all accessories in warm rinse water with
• Rinse with clean water and dry the parts. Do not put
Housing
The housing can be wiped clean with a slightly damp cloth.
• Clean the appliance as described and allow it to dry
• You can wrap the mains cable around the motor housing.
• The attachment device (6) is intended exclusively for the
• We recommend storing the appliance in its original
• Always store the appliance out of the reach of children in
Troubleshooting
Possible Cause
The appliance has no power supply.
The collection container is full.
There is a foreign object in the suction
hose or nozzle.
The appliance has tipped over.
The sealing ring between the motor hous-
ing and the collection unit is missing.
or a nylon brush.
a little hand dishwashing liquid. If they are not very dirty,
you can just tap them out.
the appliance back into operation until all filters are
completely dry.
Storage
completely.
floor nozzle without tube and hose.
packaging if you do not intend to use it for a long period
of time.
a well-ventilated and dry place.
Remedy
Check the socket with another appliance.
Insert the mains plug correctly.
Check the house fuse.
Empty the collection container.
Check the accessories for foreign objects.
1. Switch off the appliance.
2. Maintain the standstill of the motor.
3. Resume operation.
Check the seal.
13.02.23
