Remote Control Unit; Display - Teac SR-LX5i Manual Del Usuario

Remote Control Unit

The provided Remote Control Unit allows
the unit to be operated from a distance.
When operating the remote control unit,
point it towards the remote sensor on the
front panel of the unit.
< Even if the remote control unit is
operated within the effective range,
remote control operation may be
impossible if there are any obstacles
between the unit and the remote control.
< If the remote control unit is operated near
other products which generate infrared
rays, or if other remote control devices
using infrared rays are used near the unit,
it may operate incorrectly. Conversely, the
other products may also operate
incorrectly.
Battery Installation
1. Remove the battery compartment cover.
2. Put in the lithium battery (CR2032, 3V).
3. Close the cover.
Battery Replacement
If the distance required between the
remote control unit and main unit
decreases, the battery is exhausted. In this
case, replace the battery with a new one.
Precautions concerning batteries
Do not heat or disassemble batteries and
never dispose of old batteries by throwing
them in a fire.

Display

A B C
K J
A
Lights when the DBSS HI/LO button on
the remote control is pressed.
B
Lights when video output is on.
C
Lights when the sleep function is active.
D
Lights in preset tuning mode.
E Lights when the snooze function is
active.
F Shows the digital clock, sleep time or
preset channels or current DBSS level.
G Lights when an FM stereo broadcast is
tuned.
H
Lights when the timer is on.
I Shows frequency, volume, date, etc.
J When the unit is on, one of these
indicators lights to show the current
source.
K Lights for an option (buzzer) in the timer
source selection.
D E F
I H G
5