Mp3 And Wma; Remote Control Unit - Teac MC-DX40 Manual Del Usuario

MP3 and WMA

<
This unit can play MP3 and WMA files recorded on a CD-R, CD-
RW, and MP3 files on a USB storage device.
<
File names of MP3 or WMA should be alphanumeric characters.
This unit cannot display symbols and full-size or double-byte
characters (such as Japanese, Chinese, etc.) correctly. Also, be
sure to use the file extension. (".mp3" for MP3 files, ".wma" for
WMA files.)
<
MP3 files are mono or stereo MPEG-1 Audio Layer 3 format. This
unit can play MP3 files with sampling frequency 44.1 kHz or 48
kHz, bit-rate 320 kbps or less.
<
This unit can play WMA files with sampling frequency 44.1 kHz,
bit-rate 192 kbps or less. WMA means Windows Media Audio.
<
Audio encoded at 128 Kbps should sound close to regular audio
CD quality. Although this player will play lower bit-rate MP3
tracks, the sound quality becomes noticeably worse at lower bit
rates.
Disc
<
The disc must be finalized in order to play.
<
The CD-ROM must be ISO 9660 compatible.
<
When more than 255 files are recorded on the disc, the unit
might not be able to play it correctly.
USB
<
This unit supports USB 1.1 FULL SPEED (12Mbps).
<
This unit can play MP3 files recorded in various external USB
storage devices such as USB flash memory or HDD. The HDD
must be formatted FAT 16 or FAT 32, but not NTFS.
<
When more than 500 files are recorded on the USB memory, the
unit might not be able to play it correctly.
<
This unit might not be able to play MP3 memory player via the
USB.
All manuals and user guides at all-guides.com
The provided Remote Control Unit allows the unit to be operated
from a distance.
When operating the remote control unit, point it towards the
remote sensor on the front panel of the unit.
<
Even if the remote control unit is operated within the effective
range, remote control operation may be impossible if there are
any obstacles between the unit and the remote control.
<
If the remote control unit is operated near other products which
generate infrared rays, or if other remote control devices using
infrared rays are used near the unit, it may operate incorrectly.
Conversely, the other products may also operate incorrectly.
Battery Installation
1 Remove the battery compartment cover.
2 Put in the lithium battery (CR2025, 3V) with the positive side (+)
facing outside.
3 Close the cover.
Battery Replacement
If the distance required between the remote control unit and
main unit decreases, the battery is exhausted. In this case, replace
the battery with a new one.
Precautions concerning batteries
Do not heat or disassemble batteries and never dispose of old
batteries by throwing them in a fire.

Remote Control Unit

1
2
3
9