Idiomas disponibles
Idiomas disponibles
persons of impaired mental, sensory and intellectual functions. Place the unit in
such a way that the mains plug can be reached at any time. Ensure that the power
supply to the unit corresponds to that specified on the identification plate!
ASSEMBLY OF THE UNIT
CAUTION!
complete and as expected! In case of discrepancies, contact the supplier
immediately!
Slide the circular agitator platform (4) onto the stem of the main unit (8). Secure from
the bottom with the assembly screw (9). Check for stability, tighten if necessary.
Connect the power cord (7) to the unit's power output (6).
After completing these installation steps, you can start working with the unit.
3.3. Working with the unit
a) Plug the machine into a power outlet.
b) Start up the unit by setting the power switch to the "I" position. The power
indicator light will turn on.
Setting the switch to the "0" position will turn off the unit.
c)
When the unit is turned on, the mixing process will begin automatically.
d) Set the desired speed value using the dial.
Turn the knob clockwise to increase the rpm,
Turn the knob to the left to decrease rpm.
e) If the process time is over, turn the unit off by reducing the speed and setting
the power switch to the "0" position.
Before working on the unit, make sure that all components are
