Krups Virtuoso XP442 Manual De Instrucciones página 7

„ Keep the ground coffee in the fridge as this will lock in the flavour for longer.
„ Do not fill your filter holder to the brim; use the measuring spoon (1 spoon for a 30ml espresso,
2 spoons for 2 x 30ml espressos). Clean off any excess coffee from around the filter holder.
„ If you have not used the appliance for more than 5 days, empty and rinse the water tank.
„ Always make sure the appliance is switched off before removing the tank to fill it or empty it.
„ Always ensure the appliance is positioned on a flat and stable surface.
OR IF THE MACHINE HAS NOT BEEN USED FOR A
IMPORTANT! Do not place heating elements on the appliance.
IMPORTANT! The safety instructions are part of the appliance.
Please read them carefully before using your new appliance.
RINSING THE SYSTEMS BEFORE FIRST USE
To ensure your first cup of coffee tastes great, we strongly recommend that you rinse the
espresso machine with hot water, as instructed below:
1. Remove the water tank (A) (1) and fill it (2). The water level should not exceed the
"MAX" mark on the tank and should contain at least 300 ml (= equivalent to 2 large
cups). Then place it back on the machine, ensuring that the cover is closed (3).
2. Connect the device to a mains socket (4).
Make sure the knob (L) is set to the preheat position (L1) .
3.
4. Press On button (C) (5) on control panel (D). On button light switches on, and espresso
buttons
5. Place a filter (F2) (7) without coffee into the filter holder. Slot the filter holder into place
and turn it to the right until it stops (8).
6. Place two cups under the filter holder.
7. When the temperature reaches pre-set value, espresso buttons white light will keep on.
Press 2 espresso button
water (10). When it is over, espresso buttons
8. Press steam button
orange light keep on, the machine is pre-heating.
9. Place the steam nozzle (G1) into a container filled with water (12).
10. Turn the knob (L) from preheat (L1) to steam position (L2) (13), steam button
light flashes, the machine starts to make steam. Let the water heat for 20 seconds, then
turn the knob back to preheat position (L1) (14).
2
FIRST USE
LONG PERIOD
lights flash white (6). The machine is pre-heating.
(9), button flashes white. The machine starts to pour the
(11). Espresso buttons
white light keep on.
white light off, steam button
white