To Clean The Hydraulic Oil Cooler; To Clean The Engine And The Muffler; To Clean The Engine Cooling Air Intake; To Remove Blockage From The Auger - Husqvarna RC 318T Manual De Usuario

To clean the engine and the muffler

Keep the engine and muffler free from grass cuttings
and dirt. Grass cuttings soaked in fuel or oil on the
engine can increase the fire risk and the risk that the
engine becomes too hot. Let the engine cool before it is
cleaned. Clean with water and a brush.
Grass cuttings around the muffler dry quickly and are a
fire risk. Use a brush or remove the grass cuttings with
water when the muffler is cold.

To clean the engine cooling air intake

Make sure that the engine cooling air intake is not
blocked. Remove grass and dirt with a brush.
22

To clean the hydraulic oil cooler

Only for RC 320Ts AWD.
Make sure that the hydraulic oil cooling fan is not
blocked and that the area around the hydraulic oil cooler
is clean. Remove grass and dirt with a brush.

To remove blockage from the auger

If the symbol on the auger button is red and the product
beeps continuously, the auger is blocked. The blockage
must be manually removed.
1. Tilt the collector.
2. Pull the auger maintenance tool loose from the
bottom of the collector.
3. Put the auger maintenance tool into the hole at the
top part of the auger.
368 - 006 - 10.11.2022