Additional Information; Troubleshooting - Pioneer X-SMC02 Manual De Instrucciones

Additional information

Chapter 10:
Additional information

Troubleshooting

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this
component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components
and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your
nearest Pioneer authorized service center or your dealer to carry out repair work.
• If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the
outlet and insert again to return to normal operating conditions.
General problem
Problem
Settings you have made
have been cleared.
Difference in volume
between CDs, MP3, Tuner,
and AUDIO IN.
Disc cannot be played.
Sound skips when the disc is
played back.
Folder or file names are not
recognized.
Folder or file names are not
displayed in alphabetical
order.
The unit turns off
automatically.
Check
Was the power cord unplugged?
This is not a problem with this unit.
Is the disc scratched?
Is the disc dirty?
Is the disc inserted correctly?
Is this unit placed in a humid
location?
Is the playback volume too loud?
Have you exceeded the maximum
number of folder or file names this
unit can recognize?
This is not a problem with this unit.
Remedy
When power cord is unplugged, the settings you have made is
cleared. Please set the clock again. If you do not want to clear the
settings, do not unplug the power cord.
The volume may sound differently depending on the input source
and recording format.
Scratched discs may not play.
Wipe the dirt off the disc (page 29).
Make sure that the printed label is facing outward, visible to you
(page 11).
There could be condensation inside. Wait a while for the
condensation to evaporate. Do not place this unit near an air-
conditioner, etc. (page 29).
If the sound skips when played back at a loud volume, reduce the
playback volume.
The unit can recognize up to 999 files on a single disc or on a
single USB memory device. The number of folders is up to 255.
Depending on the folder structure, there may be folders or files
that the unit cannot recognize.
Only single-byte alphanumeric characters can be displayed. Any
character that cannot be displayed will be indicated by a "*".
The order of the folder and file names displayed depends on the
order in which the folders or files were recorded on the USB
storage device.
If no play back and no operation has done for 20 minutes or more,
the unit turns off automatically.
In this case it is required that the Auto power off is switched to ON
(page 10).
10
25
En