Idiomas disponibles
Idiomas disponibles
EN
(4) Cutter length
(5) Filing angle
(6) Side plate angle
(7) Top plate cutting angle
10. TROUBLESHOOTING GUIDE
Case 1. Starting failure
CHECK
Fuel tank
Fuel filter
Carburetor adjustment screw
Sparking (no spark)
Spark plug
Case 2. Engine starts but does not keep running/hard re-starting
CHECK
Fuel tank
Carburetor adjustment screw
Muffler, cylinder (exhaust port)
Air cleaner
Cylinder fin, fan cover
When your unit seems to need further service, please consult with our service shop in your area.
58
TRANSMISSION
Remove the cutter holders before
installing new grease so that the old
grease can escape.
When adding lubricant, use a
grease gun to insert the three
grease nipples located on the
transmission.
(1) Grease fitting
PROBABLE CAUSES
Incorrect fuel
Fuel filter is clogged
Out of normal range
Spark plug is fouled/wet
Plug gap is incorrect
Disconnected
PROBABLE CAUSES
Incorrect fuel or staled fuel
Out of normal range
Carbon is built-up
Clogged with dust
Clogged with dust
9. DISPOSAL
When disposing your machine, fuel
or oil for the machine, be sure to
allow your local regulations.
ACTION
Drain it and use correct fuel
Clean
Adjust to normal range
Clean/dry
Correct (gap: 0.6 - 0.7 Mm)
Retighten
ACTION
Drain it and use correct fuel
Adjust to normal range
Wipe away
Wash
Clean
