Idiomas disponibles
Idiomas disponibles
English
► Protect the battery from exposure to conduc‐
tive liquids such as salt water.
► For maximum battery life, store the battery at
an ambient temperature between 50 °F and
68 °F (10 °C and 20 °C) with a charge
between 40 % and 60 % for STIHL AP series
batteries and a charge of 30 % to 45 % for
STIHL AR series batteries (2 green LEDs).
► Do not leave spare batteries unused. Use
them in rotation.
NOTICE
■ A battery that is not stored properly may expe‐
rience deep discharge, which can result in per‐
manent damage. To avoid deep discharge:
– Remove the battery from the hedge trim‐
mer after finishing work.
– For maximum battery life, store the bat‐
tery with a charge between 40 % and
60 % for STIHL AP series batteries and a
charge of 30 % to 45 % for STIHL AR ser‐
ies batteries (2 green LEDs).
– If storing the battery in the charger, dis‐
connect the charger from the outlet.
– For maximum battery life, store the bat‐
tery at an ambient temperature between
50 °F and 68 °F (10 °C and 20 °C).
20 Cleaning
20.1
Cleaning the Hedge Trimmer
WARNING
■ To reduce the risk of personal injury from unin‐
tended activation, remove the battery before
carrying out any cleaning work,
To clean the hedge trimmer:
► Clean the hedge trimmer's polymer compo‐
nents with a slightly dampened cloth. Do not
21 Inspection and Maintenance
21.1
Inspection and Maintenance Chart
Always remove the battery before carrying out any inspection, cleaning or maintenance.
The following maintenance intervals are examples and apply for normal
operating conditions. Actual use and your experience will determine the fre‐
quency of required inspection and maintenance.
Complete Machine
22
use detergents or solvents. They may damage
the polymer components.
► Do not use a pressure washer to clean the
hedge trimmer or otherwise spray it with water
or other liquids.
► Keep the socket free from foreign matter and
clean as necessary with a soft brush or soft,
dry cloth.
NOTICE
■ Never spray the hedge trimmer with water.
Spraying it with a stream of water could result
in damage to the electronics and other sys‐
tems.
20.2
■ To reduce the risk of personal injury from unin‐
tended activation, remove the battery before
carrying out any cleaning work,
of this hedge trimmer should carry out only the
cleaning described in this manual. To help
prevent injuries, always wear heavy-duty work
gloves when handling the hedge trimmer or its
cutting blades,
To clean the cutting blades:
► Spray both sides of the cutting blades with a
resin solvent, such as STIHL Resin Remover
and Lubricant.
► Insert the battery and switch on the hedge
trimmer for a few seconds to evenly distribute
the resin solvent throughout the cutting
blades.
► Do not use a pressure washer to clean the
6.4.
cutting blades or spray them with water or
other liquids.
Visual inspection
Cleaning the Cutting Blades
WARNING
6.3.
X
20 Cleaning
6.4. Users
0458-020-8601-A
