Hilti DWP 10 Manual De Instrucciones Original página 15

3 Description
3.1 Product overview
3.2 Intended use
The product described here is a water pressure tank for distributing coolants and flushing liquids on drilling
rigs, concrete saws or angle grinders. Water is generally used for this purpose.
3.3 Possible misuse
This product is not suitable for:
• Flammable liquids
• Hydrogen peroxide and similar oxygen emitting media
• Caustic substances (certain disinfectants and impregnating agents, acids, alkaline solutions)
• Liquids containing ammonia
• Solvents and liquids containing solvents
• Viscous or sticky liquids or those that form residues (paints, grease)
• Use in food sector
This product may not be used under any circumstances:
• With external pressure sources
• For warehousing and storage of liquids
• As an eye wash
3.4 Items supplied
Tank with pump, hose with connectors, operating instructions
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4 Product properties
The tank material consists of steel with a polyester coating.
Tare weight
Total content
Maximum filling quantity
Technical residual quantity
*247636*
1
247636
Tank
@
Filling quantity display
;
Locating pin
=
Pressure gage
%
Safety valve
&
Pump
(
Hose plug-in nipple with ball valve
)
Hose
+
Hose plug-in nipple
§
Drain opening
/
5.2 kg
13 ℓ
10 ℓ
0.03 ℓ
English 9