Operation; Charging Instructions; Charging Time - Tineco iFLOOR3 BREEZE Serie Manual De Uso

OPERATION

Preparing for Use
• Before first use, please charge the appliance
for 4-5 hours (refer to "Charging Instructions"
for details).
* Based on results from Tineco lab tests. Lab
temperature 39.2°F (4°C) ~ 104°F (40°C).
1.Press to turn on the appliance and press it
again to turn off.
2.Press to use Max water flow and the
indicator blinks blue light.
Fig.C-1
3.The appliance will stop working when put
uprightly and start running again when you
recline.
* Do not recline more than 142° to protect
against water leakage.
Fig.C-2
4.Place the appliance on the storage tray
vertically after use.
Fig.C-3
Note:
• Do not vacuum foamed liquid.
• To vacuum water left on the surface, the
appliance will switch off in 3 seconds after
power off.
Filling Clean Water Tank
1.Press the Clean Water Tank release button to
remove it from the appliance.
Fig.C-4
2.Open the tank cap, and fill with tap water to
the Max line. When deep cleaning is necessary,
add one bottle cap of solution to the CWT and
tightly close the cap.
Fig.C-5
Note:
Only use water under 140°F/60°C.
DO NOT USE HOT WATER.
3.Place the tank back into the appliance. You
should hear a "Click" if done correctly.
Fig.C-6

Charging Instructions

Please charge the appliance when the indicator
blinks red.
1.To charge the appliance, connect the external
charging cord to the appliance and plug it into
the wall outlet.
2.To avoid tripping hazards, please place the
appliance on the storage tray near a wall
during charging.
Fig.C-7
Warning:
• Only charge the appliance with the adaptor
supplied by Tineco.
• During long periods of not being used, the
appliance must be charged once every
3 months for optimal performance. It may take
4-5 hours for a full charge.
• Store indoors in a dry place. Do not expose the
appliance to sunlight or freezing temperatures.
Recommended temperature range:
39.2°F (4°C) ~ 104°F (40°C).
Runtime
• The runtime is above 20 minutes, and using
Max water flow won't affect the runtime.
• Estimated runtime data was obtained by a
Tineco Laboratory.

Charging Time

• A full charge takes approximately 4-5 hours.
• Estimated data was obtained by a Tineco
Laboratory using ambient temperatures
between 39.2°F (4°C) to 104°F (40°C).
Indicator
When in Use
9
Slowly blinking red light:
low power.
Solid blue light: regular
mode.