Skil 1360 Manual Original página 13

a
Bench Drill
INTRODUCTION
• This tool is intended as a stationary machine for drilling
holes in wood, plastics, aluminium and steel
• Read and save this instruction manual 2
• This tool is not intended for professional use
• Only use the tool when correctly and completely
assembled (be aware that Skil cannot be hold
responsible for tool damage and/or personal injuries
resulting from the incorrect assembly of the tool)
• Check whether the packaging contains all parts as
illustrated in drawing 7
TECHNICAL DATA 1
TOOL ELEMENTS 6
Pulley housing cover
A
B Laser housing
C Feed return spring and cover
D ON/OFF switch
E LED work light switch
F Laser switch
G Chuck
H Rack collar
J LED work light
K Support lock handle
L Bevel scale
M Chuck key
N Belt/pulley speed chart
P Pulley cover knob
Q Motor pulley
R Spindle pulley
S Tension lock knob
T Feed handle
U Crank handle
V Column support
W Base
X Table
Y Depth scale
Z Depth lock nut
AA Depth stop nut
AB Depth stop ring
AC Laser light
AD Column & rack assembly
AF Hex bolts
AG 3mm hex wrench
AH 4mm hex wrench
AI Vice
AJ Hex bolts for vice
AK Plain washers
AL Hex nuts
AM Rack
AN Crank handle hole
AO Table support
AP Worm shaft
AQ Spindle
AR Motor
AS Belt
AT Motor mount nuts
AU Bevel lock bolt
1360
AV Gear teeth
AW Chuck jaw
AX Key storage slot
AY Housing set screw
AZ Laser adjustment knob
BA Laser set screw
BB Workpiece
BC Spindle sleeve
BD Pulley set screw
BE Locking pin
SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: Read all safety warnings, instructions,
-
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
13