Rear Panel; Equipment Mains Input Module And Voltage Selector; Power On-Off Switch - Gima DIATERMO 106 Manual De Instrucciones

GIMA SpA DIATERMO 106

4.2 REAR PANEL

1 - IEC MAINS INPUT CONNECTOR
2 - MAINS SWITCH
3 - FUSE HOLDER AND VOLTAGE SELECTOR
4.2.1 E M I M V S
QUIPMENT AINS NPUT ODULE AND OLTAGE ELECTOR
The equipment mains input module provides the connection point for the power of the equipment's internal electronics. The mains
input module incorporates the mains input socket, the main input voltage selector and in-line mains fuses.
WARNING: Before the unit is powered up the operator should check that the mains input voltage indicated on the power input
module corresponds to the mains voltage supply to which it is to be connected, and that the correct mains fuse type for the selected
mains voltage has been inserted.
4.2.2 P O -O S
OWER N FF WITCH
POWER ON/OFF mechanical switch is used to control power to the equipment. To power the equipment, press the switch in the
direction of the 1 (i.e. right side).
When the equipment is powered the front panel will illuminate. Pressing the switch in the 0 direction will cut power to the
equipment, this operation allows the switch to be used as a emergency stop switch, in the event of any fault.
27
Manuale d'Istruzione / Instruction's Manual / Manual de Instrucciones MA126IGBa