Maintenance - Tineco CARPET ONE SPOT Serie Manual De Uso

Maintenance

Note:
• For optimal performance and to prevent odors, always clean and dry DWT, power brush and power
brush cover completely after each use.
• Please make sure each part is installed correctly or the appliance may not work properly.
• After maintenance, place the appliance on the charging base vertically. Do not expose the appliance
to direct sunlight, and store it indoors in a dry place.
Power Brush Self-cleaning
Dirty Water Tank
• When dirty water reaches the Max line, the appliance will stop working and show a reminder on the
display and play a voice prompt.
• Pull up the tank lid to empty the DWT. Rinse the inside of the DWT and place back into the
appliance.
Power Brush
• Press against the roller end cover downward.
• Pull out the brush roller.
• Remove the debris wrapped around the roller and rinse with water.
• Fully reinsert the brush roller at an angle and push upward until it clicks securely back into place.
Plug the adaptor into the main body, and press the
the handle to start the self-cleaning cycle.
Note:
• Ensure the charging base is plugged in for the self-cleaning.
• Before self-cleaning cycle, please clean the DWT and ensure the
water level in the CWT exceeds 20%.
15
button on