GB
Please read this instruction manual
time and comply with it.
Keep this instruction manual for
future reference or for subsequent
possessors.
The device is used properly if it is only used to
illuminate ordinary working areas and, in the process,
technical data. Any other or additional use is not
permitted.
The device may not be used:
• in areas with harmful gases, oils, acids,
radiation, etc.
• in areas with an explosion risk.
This device complies with all relevant norms and
standards required for CE compliance. Compliance
with these standards is no longer guaranteed when
this device has been modified.
Safety instructions
Do not open the device.
■
There is a risk of short-circuit. Repairs on the device
■
may only be carried out by commissioned and trai-
ned persons. Please contact your Würth branch.
Protect the battery against heat,
■
e. g., against continuous intense
re. Danger of explosion.
For your own safety
Usage
Warning - Do not look directly into
the light emitting lamp - Risk of eye
injuries!
Always only use the charger recommended by the
manufacturer to charge the lamp. The use of a
NON-recommended charger can lead to a fire and
destroy the lamp.
If the battery is damaged or not used
■
correctly;
•
vapours may leak and irritate the respiratory
system. Provide fresh air and contact a doctor in
the event of any discomfort.
•
fluids can leak from the battery. Avoid contact with
these. Leaking battery fluids can lead to skin irri-
tation or burns. Rinse off with water if you should
come into contact. If the fluid gets into your eyes,
make sure you get medical help.
•
there can be an internal short-circuit, the battery
may become overheated and explode or catch
fire.
Any damaged device or charger may no
longer be used and may be exchanged by
the manufacturer only.
The lamp may not be used in potentially explosive
■
areas.
Only stand the lamp on its head when it is swit-
■
The bulb of this lamp cannot be exchanged.
■
The whole lamp must be exchanged when the
-
bulb is defective.
7