Common Troubleshooting
Fault
The coffee is spill out
from the gap of the
filter holder
1. The coffee handle
could not be switched
to the lock position.
2. The coffee is spill
out from the gap of the
filter holder
Cold coffee
The pump is too noisy
Cause analysis
There are sundries inside the
seal ring.
The coffee powder is too fine.
The coffee powder has been
pressed too tightly.
The seal ring is of aging.
The coffee powder amount
has exceeded the max scale
of the filter holder.
The coffee powder hasn't be
added and the handle could
not be switched to the right
place.
There are sundries inside the
seal ring.
The coffee powder is too fine.
The indicator light is not on
Coffee machine is not pre-
heated
Coffee cup is not preheated
Without water in water tank
Mount the water tank in
wrong way
Solution
Clean the sundries inside the seal
ring.
Please replace it with the coffee pow-
der which is relevantly coarse.
Please press the coffee power with
strength of 3.3 pounds (about 1.5kg)
Please contact the authorized service
center.
Decrease the amount of the coffee
powder.
Please contact the authorized service
center.
Clean the sundries inside the seal
ring.
Please replace it with the coffee pow-
der which is relevantly coarse.
Operation when the indicator light is
on
Please preheat the coffee machine
Please preheat the coffee cup
Please pour water into water tank
Please mount water tank in right way
11