MAAX Grondfress 21039 Manual De Usuario página 64

MAINTENANCE
Muffler
- Inspect periodically , the mffler for loose fasteners, any damage or corrosion. If any sign
of exhaust leakage is found, stop using the machine and have it repaired immediately.
- Note that failing to do so may result in the engine catching on fire.
Check to see if any oil or grease has worked its way in between the clutch lining and drum, and
if wipe it away using oil-free, lead-free gasoline.
Intake Air cooling vent
Intake Air cooling vent
- Never touch the cylinder, muffler, or spark plugs with your bare hands immediately after
Never touch the cylinder , muffler , or

stopping the engine. The engine can become very hot when in operation, and doing so could
result in severe burns.
spark plugs with
- When checking the machine to make sure that it is okay before using it, check the area around
immediately after stopping the engine . The
the muffler and remove any devris. Failing to do so could cause the muffler to become
engine can become very hot when in
overheated, and that this in turn could cause the engine to catch to fire. Always make that the
muffler is clean and free of debris before use.
operation , and doing so could result in
- Check the intake are cooling fins after every 25 hours of use fo blockage. Note that it is
severe burns.
necessary to remove the engine cover in order to view the upper part of the cylinder.
When checking the machine to make sure

Procedures to be performed after every 100 hours of use
that it is okay before using it , check the
1. Remove the muffler, insert a screwdriver into the vent, and wipe away any carbon buildup.
area around the muffler and remove any
Wipe away any carbon buildup on the muffler exhaust vent and cylinder exhaust port at the
same time .
devris . Failing to do so could cause the
2. Tighten all screws, bolts , and fittings.
muffler to become overheated , and that
this in turn could cause the engine to catch
to fire . Always make that the muffler is
clean and free of debris before use.
Check the intake are cooling fins after

every 25 hours of use fo blockage . Note
that it is necessary to remove the engine
cover in order to view the upper part of the
cylinder.
Procedures to be performed after every 100
hours of use
1. Remove the muffler , insert a screwdriver
into the vent , and wipe away any carbon
buildup. Wipe away any carbon buildup on
64 the muffler exhaust vent and cylinder
exhaust port at the same time .
your bare hands