MAAX Grondfress 21039 Manual De Usuario página 57

ultivator 6. Attach the wheel cup to the wheel assy.
Repeat on other side.
6. Attach the wheel cup to the wheel assy.
Repeat on other side.
ease
7.Attach the bracket assy to the Tiller
y. Please
Tiller / cultivator. Referrence step
3.step 2. step 1.
7. Attach the bracket assy to the Tiller Tiller /
7.Attach the bracket assy to the Tiller
cultivator. Reference step 3. step 2. step 1.
Tiller / cultivator. Referrence step
3.step 2. step 1.
d
r and
6
6
3. How to assemble handles
3. How to assemble handles
1. Attach the middle handle to the lower handle
HOW TO ASSEMBLE HANDLES
1. Attach the middle handle to the lower handle
1. Attach the middle handle to the lower
using the knobs and bolts provided.The knobs
using the knobs and bolts provided.The knobs
handle using the knobs and bolts provided.
should be on the outside.
The knobs should be on the outside.
should be on the outside.
2.Attach the left handle and right handle to the
2. Attach the left handle and right handle to
middle handle using the knobs and bolts
2.Attach the left handle and right handle to the
the middle handle using the knobs and
provided .The knob should be on the outside.
middle handle using the knobs and bolts
bolts provided . The knob should be on
the outside.
provided .The knob should be on the outside.
Fuel Mix
Your tiller/ cultivator is powered by a
commercial two stroke engine which requires a
Fuel Mix
fuel mixture of gasoline and lubricating oil.
Your tiller/ cultivator is powered by a
Use a mixture of 25 parts unleaded regular
commercial two stroke engine which requires a
gasoline and 1 part two-stroke oil(25:1). Make
fuel mixture of gasoline and lubricating oil.
sure to use gasoline with a minimum octane
Use a mixture of 25 parts unleaded regular
number of 90 ROZ.
gasoline and 1 part two-stroke oil(25:1). Make
Recommended mixing ratio
sure to use gasoline with a minimum octane
Gasoline 25: Oil 1
number of 90 ROZ.
Exhaust emission are control led by the
Recommended mixing ratio
fundaments engine parameters and components
(eq. carburators , ignition timing and port
Gasoline 25: Oil 1
timing)without addition of any major hardware
Exhaust emission are control led by the
or the introduction of an inert material during
fundaments engine parameters and components
combustion.
(eq. carburators , ignition timing and port
timing)without addition of any major hardware
or the introduction of an inert material during
combustion.
How
How to m
1.
1. Pour 2
contai
the en
2.
2. Add 0
the ga
of the
3. Screw
3.
Then
gas.
Fueling th
Fue
1. Carefu
1.
/ cultiv
2. Put fu
2.
full ca
3. Fasten
any fu 3.
IMPORTA
and ages. D
IMP
in a month
and
starting or
in a
container t
start
use. Do no
cont
gasoline o
use.
REMEMB
gaso
Alwa

REM
befor
Neve

gasol
and v
Alwa

use u
Neve


the en
Alwa


propo
engin

gasol
Gaso

rubbe
disrup
Oil fo


coded
spark
block

57