Fitting And Removing The Grass Box; Fitting The Grass Box; Detaching The Grass Catcher Box; Fitting And Removing The Mulch Plug - Stihl RMA 510.0 V Manual De Instrucciones

7 Assembling the Lawn Mower
7
8
1
► Align upper handle (1) and lower handle (2) so that the pin
(4) engages the hole (3) at both sides.
► Insert screw (5) and line it up so that the screw head is
flush with the lower handle (2) on both sides.
► Fit the star knob nut (6).
► Push the cable (7) into the retainer (8).
The handle need not be removed again.
7.2

Fitting and Removing the Grass Box

7.2.1

Fitting the Grass Box

► Switch off the mower, remove the activation key and
battery.
► Place the mower on a flat surface.
► If the side chute is still in place: Remove the chute.
► If the mulch plug is still in place: Remove the mulch plug.
1
0458-819-9921-A
2
2
5
4
6
3
1
5
4
3
2
► Open the discharge shield (1) and hold it in position.
► Hold grass box (2) by the handle (3) and engage the
hooks (4) on the rod (5).
► Rest the discharge shield (1) on the grass box (2).
7.2.2

Detaching the Grass Catcher Box

► Switch the lawn mower off.
► Place the lawn mower on a level surface.
► Open the discharge flap and hold it open.
► Remove the grass catcher box upwards by the handle.
► Close the discharge flap.
7.3

Fitting and Removing the Mulch Plug

7.3.1

Fitting the Mulch Plug

► Switch off the mower, remove the activation key and
battery.
► Place the mower on a flat surface.
1
► Open the discharge shield (1) and hold it in position.
► Hold the mulch plug (2) by the grip (3) and fit it in the
discharge duct (4).
► Close the discharge shield (1).
7.3.2

Removing the Mulch Plug

► Switch off the mower, remove the activation key and
battery.
► Place the mower on a flat surface.
English
2 3
4
15