Husqvarna LG 504 Manual De Usuario página 15

2. Remove the V-belt cover.
3. Examine the V-belt for damages and wear. Replace
the V-belt if it is necessary.
4. Do a check of the V-belt tension.
5. If the V-belt tension is not sufficient, do this
procedure:
a) Loosen the screw on the belt tensioner (A).
b) Loosen the locknut (B).
c) Turn the adjustment screw (C) to adjust the belt
tensioner.
d) Tighten the screw on the locknut (B) and the belt
tensioner (A).
6. Install the V-belt cover.
1229 - 004 - 12.10.2022
To replace the oil in the eccentric
element
1. Remove the oil drain plug for the eccentric element
and connect a hose.
2. Tilt the product to drain the oil.
Note:
to drain the oil in the eccentric element.
3. Clean the surfaces around the hole for the oil drain
B
C
plug, the threads of the hole and the oil drain plug.
Use a dry cloth and, if it is necessary, an applicable
solvent.
A
You can also use a manual oil drain pump
CAUTION:
Do not use water to
clean around and on the oil drain plug.
15