Tabla de contenido
Idiomas disponibles
Idiomas disponibles
General product maintenance
Examine all rubber hoses and rubber elements for dam-
age. Replace if it is necessary.
Do a check of the hydraulic oil level.
Do a check of the battery terminals.
Replace the oil in the eccentric element.
Replace the hydraulic oil.
Engine maintenance
Do a check of the fuel level and the engine oil level.
Clean the cooling fins of the engine.
Examine the air filter indicator. Clean the air filter if it is
necessary.
Replace the air filter.
Do a check of the drain valve for the air filter. Only appli-
cable for engines that have a cyclone precleaner.
Replace the engine oil.
Do a check of the engine speed.
Drain and clean the fuel tank and clean the fuel filter.
Adjust the valve head clearance for the air intake and the
exhaust valves.
Replace the oil filter.
Do a check of the fuel injection pump.
Do a check of the fuel injection nozzle.
Drain water from the fuel system.
Replace the fuel filter.
To clean the product
CAUTION:
product, attach a plastic bag tightly around
the fuel tank cap. This is to make sure that
water does not go into the venthole in the
fuel tank cap.
•
Use running water from a hose or a high-pressure
washer to clean the product.
1229 - 004 - 12.10.2022
Before you clean the
Before use,
Each 100 h
each 10 h
Before use,
After the
each 10 h
first 20 h
X
O
X
X
O
O
O
O
CAUTION:
directly at the fuel tank cap, electrical
components or the engine.
•
Remove grease and oil from the handle.
To do a general inspection
•
Make sure that all nuts and screws on the product
are tightened correctly.
To do a check of the engine oil level
1. Remove the oil tank cap and dipstick.
Each 6
Yearly, each
months or
500 h
250 h
X
X
X
X
*
*
X
X
X
Yearly, each
Each 250 h
500 h
O
O
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
Do not point the water
13
Tabla de contenido
