Optika B-510 Serie Manual De Instrucciones página 34

11. Install the emission filter on the holder ④ always making sure
that the arrow on the filter is pointing inward. (Fig. 42)
12. Once the filter is in place secure it with a dot of glue.
• Use an "Anti-blooming" type glue to avoid that during
the drying of the glue the vapors condense on the filter
causing an opacification of the filter itself.
13. Reassemble the filter slider.
14. Reassemble the slide on the illuminator and tighten the lock-
ing screw ①.
Page 34
F ig. 42 F ig. 42