Technical Specifications - HURNER Weld Control 315 2.0 Manual De Instrucciones

H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
3.4

Technical Specifications

HÜRNER Weld Control 315 2.0
Electrical Specifications
Voltage
Frequency
Total rated power
Heating element rated power
Facing tool rated power
Hydraulic and control unit rated power
Power supply-side protection by breaker
Maximum length of any extension cable:
wire section 1.5 mm²
wire section 2.5 mm²
wire section 4.0 mm²
Hydraulic Specifications
Maximum operating pressure
Cylinder section
Hydraulic oil
Operating Specifications
Operating range
Ambient temperature range
Ingress protection
Memory for welding reports
Data input
Data download
Supplied reducer inserts
Dimensions
Basic machine chassis
Facing tool
Heating element
Hydraulic and control unit
Carrying and storage rack
Weights
Basic machine chassis
Facing tool
Heating element
Hydraulic and control unit
Carrying and storage rack
Transport box
All reducer inserts
When the fourth clamp of the basic machine chassis is re-
moved, tees and elbows can be clamped for processing them.
The referenced hydraulic oil is the product recom-
mended for the hydraulic system of the welder. If
a different brand, a different type is used, its tech-
Info
nical properties must be equivalent: HEES un-
Version May 2022
230 V
50 / 60 Hz
4.65 kW
3.00 kW
1.05 kW
0.60 kW
16 A (slow blow)
20 m (22 yd)
75 m (82 yd)
100 m (109 yd)
160 bar
5.89 cm²
Shell Naturelle HF-E 15
90 through 315 mm
from – 20 °C to + 60 °C
(from – 5 °F to + 140 °F)
IP 54
10,000 report
RFID transponder reader,
optionally scanner
USB A v 2.0 (480 mbit/s)
90, 110, 125, 140, 160, 180,
200, 225, 250, 280 mm
1090 × 620 × 690 mm
600 × 470 × 390 mm
600 × 470 × 50 mm
480 × 310 × 300 mm
470 × 330 × 440 mm
100 kg
21 kg
13 kg
28 kg
11 kg
37 kg
132 kg
HÜRNER Weld Control 315 2.0 User's Manual 11
EN