Displaying And Deleting Measured Values - Beurer SR-BM788 Instrucciones De Uso

7.5 Displaying and deleting measured values

The results of every successful measurement are stored
together with the date and time. The oldest measurement
is overwritten in the event of more than 60 measurements.
• Using the memory button M1 or M2, select the desired
user memory (
• To view the measurements for user memory , press the
M1 memory button.
• To view the measurements for user memory , press the
M2 memory button.
A flashes on the display.
The average value of all saved measured va-
lues in this user memory is displayed.
If Bluetooth is activated (the
®
display), the blood pressure monitor attempts to con-
nect to the app. If you press the M1 button in the me-
antime, the transfer is cancelled and the average values
are displayed. If you press the M2 button, the transfer
is cancelled and the measurement data of user memo-
ry is displayed. The
The buttons are deactivated as soon as a connection
is established and the data is transferred.
) when the device is switched off.
symbol flashes on the
symbol is no longer shown.
• Press the relevant memory button (M1 or M2)
AM flashes on the display.
The average value of the morning measure-
ments for the last 7 days is displayed (morning:
5 a.m. – 9 a.m.).
• Press the relevant memory button (M1 or M2).
PM flashes on the display.
The average value of the evening measure-
ments for the last 7 days is displayed (evening:
6 p.m. – 8 p.m.).
• If you press the relevant memory button (M1
or M2) again, the last individual measure-
ment is displayed (in this example, measure-
ment 03).
• If you press the relevant memory button (M1 or M2) once
more, you can view all previous individual measurements.
• To switch the device off again, press the START/STOP
button .
You can exit the menu at any time by pressing the
START/STOP button
31
.