Configuring Material; Configuring Protective Gas - Orbitalum ORBIMAT 300 SW Traduccion Del Manual De Instrucciones Originales

EnGLISH
2. Select the desired weld head by turning the rotary knob.
– or –
Select the weld head highlighted by the system.
3. Confirm by briefly pressing the rotary knob.
8.1.3

Configuring material

X Select the "Material" field and briefly press the rotary knob.
The following display appears:
Abb. 4: Selecting the material
1. Select the material.
2. Confirm by briefly pressing the rotary knob.
8.1.4

Configuring protective gas

1. Select the "Gas type" field and briefly press the rotary knob.
2. Select the protective gas.
3. Confirm by briefly pressing the rotary knob.
104
orbitalum tools GmbH, D-78224 Singen, www.orbitalum.com, Phone +49 (0) 77 31 792-0
Materials in the list:
• Carbon steel
• Stainless steel
• Titanium
(14.01.21) OW_ORBIMAT_300SW_BA_852060202_00_EN
ORBIMAT 300 SW